Wednesday, July 4, 2012

LED Spotlights For The Underwater Rover

 The PVC

The diameter of the PVC piping is 1 1/4 inches and so the diameter of the printed circuit board will be the same. I made the printed circuit board the same diameter because the PVC couplers are slightly larger and the printed circuit board will fit snugly inside.



1 1/4 Inch Tee Adapter

The Printed Circuit Board Will Sit Right On Top Of The Inner Ledge  






 The Printed Circuit Board
Here are the printed circuit boards for the LED spotlights. Our design for the underwater rover has four forward facing holes so there will be four sets of spotlights. Each spotlight printed circuit board will have 16 white high brightness LEDs on them. The pictures below are the printed circuit boards i designed with ExpressPCB. I made four because the current design for the rover will have four front facing white LED spotlights.



The LED Spotlight Printed Circuit Board


The LED Spotlight Printed Circuit Board Top Layer




The LED Spotlight Printed Circuit Board Bottom Layer







I am not responsible or liable for any damages or loss you cause with the use of this information and i am not guaranteeing that this will work.